分板機分板厚度0.3-3.5mm分板機廠家特點
1、電氣混合式設計，雙直刀分切，特別適用于分割精密SMD薄板,鋁線路板
Electric hybrid design, double straight knife cutting, especially suitable for cutting precision SMD sheet and aluminum circuit board
2、適用各種厚度PCB，切板行程在2mm以下，絕無操作安全上的顧慮
Suitable for PCB of various thickness, the cutting stroke is less than 2mm, and there is no concern on operation safety
3、將切板時所產生的內應力降至180μST以下,避免錫裂，防止精密零件受損
Reduce the internal stress produced during plate cutting to below 180 μ st, avoid tin crack and prevent damage to precision parts
4、可分切V槽邊緣與零件寬度最小0.3mm,高度為50mm
The minimum width and height of V groove edge and parts are 0.3mm and 50mm respectively
5、刀具磨損后可免費翻磨
The tool can be turned over free of charge after being worn
分板機分板厚度0.3-3.5mm分板機廠家分享采購規格：
型號:YSVC-2
長度:330mm/200mm/130mm
外形尺寸(長×寬×高):720×300×440mm/520x300x440mm/500x300x440
分板厚度: 0.3-3.5mm
工作氣壓:0.50-0.70Mpa干燥氣源
使用電壓:220VAC
分板機分板厚度0.3-3.5mm分板機廠家分享機器重量:130kg/100kg/80kg
