中文字幕一区黄片,欧美国产精品一二三区,一级婬片A片试看30分钟,chaopengoumei


關閉
點擊這里給我發消息
點擊這里給我發消息
 +86 0512-62751429
+86 13416743702
您好,歡迎您來到:蘇州市宇順力電子有限公司官網!服務熱線:0512-62751429.
YUSH Electronic
新聞動態
氣動鍘刀式分板機的調刀方法嗎
分板機通常是指baiPCB分板機,也就是線du路板分板機zhi。分板機被dao廣泛應用于電子產品制造業回。由于傳統的人答工折板方式會有很強的應力產生,對產品品質造成嚴重影響,所以人工折板已基本上被機器分板所取代。 分板機可分以下幾種:
The board dividing machine usually refers to the baipcb board dividing machine, namely the line Du road board dividing machine. The board splitter is widely used in electronic products manufacturing industry. Due to the strong stress produced by the traditional manual folding method, which has a serious impact on the product quality, the artificial folding plate has been basically replaced by the machine. The dividing machine can be divided into the following types:
1、走刀式分板機,Knife type plate splitter
2、沖壓式分板機,Stamping plate splitter
3、銑刀式分板機,Milling cutter type plate splitter
4、激光分板機、Laser splitter
5、鍘刀式分板機。 Chopper type plate splitter
以上四種分板機的優缺點:
The advantages and disadvantages of the above four kinds of plate splitters
1、走刀式分板機 優點:成本低 缺點:只能進行直線分板。有毛邊。
Advantages: low cost, disadvantages: can only carry out linear plate. It has a rough edge.
2、沖壓式分板機 優點:首次投入成本低,速度快。缺點:由于必須專板專模,后期成本高。有應力 
Advantages: low cost and high speed for the first time. Disadvantages: due to the special plate and mold, the later cost is high. With stress
3、銑刀式分板機 優點:可進行任意形狀分板,應力很小,切割邊緣無毛邊。缺點:首次成本較大。
Advantages of milling cutter type plate dividing machine: it can divide plates of any shape, with small stress and no burr on cutting edge. Disadvantages: high cost for the first time.
4、激光分板機 優點:同時具備銑刀式分板機的優點,并可對PCB板進行微分切,無應力。 缺點:機器價格昂貴。
Advantages of laser plate splitter: it has the advantages of milling cutter type plate splitter at the same time, and can perform differential cutting on PCB board without stress. Disadvantages: the machine is expensive.
5、鍘刀式分板機 優點:純氣動(工廠常用氣壓即可),體積小巧(桌面式),出力大,可切任意寬度厚度的鋁基板,性價比高.
Advantages: pure pneumatic (factory air pressure can be used), small size (desktop type), large output, can cut aluminum substrate of any width and thickness, high cost performance
產品分類
                                        當前位置: 首頁 -> 新聞動態

                                        氣動鍘刀式分板機的調刀方法嗎


                                        分板機通常是指baiPCB分板機,也就是線du路板分板機zhi。分板機被dao廣泛應用于電子產品制造業回。由于傳統的人答工折板方式會有很強的應力產生,對產品品質造成嚴重影響,所以人工折板已基本上被機器分板所取代。 分板機可分以下幾種:
                                        The board dividing machine usually refers to the baipcb board dividing machine, namely the line Du road board dividing machine. The board splitter is widely used in electronic products manufacturing industry. Due to the strong stress produced by the traditional manual folding method, which has a serious impact on the product quality, the artificial folding plate has been basically replaced by the machine. The dividing machine can be divided into the following types:
                                        1、走刀式分板機,Knife type plate splitter
                                        2、沖壓式分板機,Stamping plate splitter
                                        3、銑刀式分板機,Milling cutter type plate splitter
                                        4、激光分板機、Laser splitter
                                        5、鍘刀式分板機。 Chopper type plate splitter
                                        以上四種分板機的優缺點:
                                        The advantages and disadvantages of the above four kinds of plate splitters
                                        1、走刀式分板機 優點:成本低 缺點:只能進行直線分板。有毛邊。
                                        Advantages: low cost, disadvantages: can only carry out linear plate. It has a rough edge.
                                        2、沖壓式分板機 優點:首次投入成本低,速度快。缺點:由于必須專板專模,后期成本高。有應力 
                                        Advantages: low cost and high speed for the first time. Disadvantages: due to the special plate and mold, the later cost is high. With stress
                                        3、銑刀式分板機 優點:可進行任意形狀分板,應力很小,切割邊緣無毛邊。缺點:首次成本較大。
                                        Advantages of milling cutter type plate dividing machine: it can divide plates of any shape, with small stress and no burr on cutting edge. Disadvantages: high cost for the first time.
                                        4、激光分板機 優點:同時具備銑刀式分板機的優點,并可對PCB板進行微分切,無應力。 缺點:機器價格昂貴。
                                        Advantages of laser plate splitter: it has the advantages of milling cutter type plate splitter at the same time, and can perform differential cutting on PCB board without stress. Disadvantages: the machine is expensive.
                                        5、鍘刀式分板機 優點:純氣動(工廠常用氣壓即可),體積小巧(桌面式),出力大,可切任意寬度厚度的鋁基板,性價比高.
                                        Advantages: pure pneumatic (factory air pressure can be used), small size (desktop type), large output, can cut aluminum substrate of any width and thickness, high cost performance
                                        蘇州市宇順力電子有限公司 版權所有 @ Copyright 2015 聯系人:劉小姐 地址:蘇州市昆山金陽東路1068號、切板機宇順力廠家專業生產切板機FPC切板機沖床切板機FR4切板機切板機圖片切板機方法模具切板機CNC切板機走刀切板機|非標切板機方案|鍘刀類型切板機氣動切板機電動切板機《中華人民共和國電信與信息服務業務經營許可證》編號:蘇ICP備14049770號-7
                                        聯系我們
                                        #字型分板機華南地址:
                                        沖床分板機地址:廣東省東莞市涌頭村山泉路十號(總部)
                                        軟板分板機咨詢:13862072520
                                        PCB Router分板機電話:0769-88087410
                                        走刀切板機網址:http://www.szfbj.com
                                        華東在線切板機地址:
                                        全自動切板機地址:江蘇省蘇州市昆山市金陽東路1068號
                                        (國瑞產業園)
                                        郵票孔切板機電話:0512-62751429
                                        咨詢基板切板機:13450659407
                                        裁切切板機郵箱:evaliu@hk-yush.com
                                        led切板機網址:http://www.yushunli.com
                                        蘇州市宇順力電子有限公司 版權所有 @ Copyright 2015 聯系人:劉小姐 地址:蘇州市昆山金陽東路1068號、切板機宇順力廠家專業生產切板機FPC切板機沖床切板機FR4切板機切板機圖片切板機方法模具切板機CNC切板機走刀切板機|非標切板機方案|鍘刀類型切板機氣動切板機電動切板機《中華人民共和國電信與信息服務業務經營許可證》編號:蘇ICP備14049770號-7